Product name: | 12W-T5-90CM-SMD3528 |
Base type | G5 |
Power Consumption: | 12W |
Compare with traditional tube: | 25W |
LEDS: | 152pcs of SMD3528 leds |
Input voltage: | 85-265VAC |
Work frequency: | 47/63HZ |
Lumens: | 900lumens(Milky Cover) |
Power Equation: | ≥0.95 |
Work Humidity: | >95% |
Color Index: | ≥ 85 Ra |
Color Temperature: | 3000-3500K(Warm White) 4000-4500K (Pure White) 5000-5500k (White) 6000-6500k(Cool White) |
Work Temperature: | 35~+45℃ |
Save Temperature: | -30~+50℃ |
Eniroment Temperature: | -20~+50℃ |
Lifetime: | 50000hours |
Size: | 1198×D16±1mm( nonincluding pins) |
Tube Meterial: | Aluminum + PC |
Certificates: | CE & ROHS |
Ⅰ.Product Parameter:
Base Type: G5
Input Voltage: AC220~240V
Output Power: 12W
Luminous Flux Output: >900 lm(Milky Cover)
Rendering Index: >70
Beam Angle: 120°(Clear Cover)/150°(Milky Cover)
Brightness attenuation: 3%-5%1KH
Light Source: SMD3528; Epistar chip
Color Temperature: 2800~3200K, 5500~6500K, 6000~7000K.
Aluminium Housing Color: Silver
LED'S Operating Life: 50,000Hours
Warranty: 2 years
Ⅱ.Product Description
LED T5 tube light 90cm.easy installation replacement for conventional inductive fluoresent lamp.Energy saving green evironment protection.The beam angle is more than 180 degree.No UV or IR radiation.Low heat emission.Lifespan 50000hrs.CE and RoHS approved.
1.High reliable constant current driving guarantees long life span of the lamp beads
2.Wide input voltage :AC85-265V /50-60Hz,applicable for most countries
3. Aero-aluminium layer in housing for better heat emission and difficult to be deformed
4.NO need ballast, power in-built, plug and play
5. Energy saving and low power consumption, compared to traditional fluorescent lamp on the condition of same illumination,saving up to 50-70%,
6.Environment friendly(ROHS material): low noise, low heat radiation, mercury free and no other polluting materials in the process of using
7.No flashing or dazzling, no UV or RF interference, good for eyes.
8.Long life span of over 50,000 hours by normal use, ten times to traditional energy-saving lamp
9.Easy installation and conventional use, direct replacement for traditional T5 fluorescent lamp brackets
Ⅲ.Illumination

Ⅳ.LED Tube light Installation

Ⅴ.LED T5 Tube Scope of application:
1. Supper market
2. Residential institution buildings
3. Instead of the indoors fluorescent lamps
4. School,universitity,hospital,hotel
5. Conference,meeting room,showroom
6. Commercial complexes
7. Factory,office,workshops
8. Industrial lighting
9. Advertisement box
10. Subway,Bus,Parking lot
11.Living room, bedroom, kitchen, washroom, warehouse, department store.
1. Cut off the power supply before installation;
2. No starter, NO ballast, or electronic switch is required;
3. Install lamp stand and T5 lamp holder first with the same length;
4. Lamp working voltage is AC85-265V.
5. Connect the two wire terminals located at the side of the lamp to the electricity L and N respectively;
Ⅶ.The packaging & delivery
1.Delivery time: 5-7days.
2.Shipping method: Courier(DHL,FedEx,UPS,TNT etc), air freight ,ocean shipping.
Ⅷ.Notice
1. When installation, pls try to avoid the minefields, strong magnetic field & high-pressure region.
2. Ensuring a solid connection corectly in order to avoid short-circuit damage to componets & trigger fires.
3. Installed in a well-ventilated place to ensure a ppropriate environmental temperature.
4. Pls check the local voltage compliance product requirements when use it.
5. Pls check to confirm wiring is correct, no short-circuit before power on.
Ⅸ.Warning
1.Please do not hit or press it with heavy substance
2.Please handle and transport gently
3.Please do not touch and twist the tube when power is on.
More information pls check our website:
Contact us pls send email to : info@ledartiste.com